Lumiglas Spray Device

product photo: Lumiglas Spray Device

• Combination with other features:
Can be combined simultaneously with Lumiglas luminaire and wiper. Care must, however, be taken that max. permissible operating temperature and resistance to temperature cycling for the relevant glass disc are considered.

Use to jet spray water, inert gas or other fluid to maintain glass visibility

• Application:
For intermittent or continuous automatic cleaning of underside of sight port glass disc. Suitable for pressure and vacuum vessels subject to pressure test certification for all standard ratings and use in explosion hazardous as well as non hazardous areas.

No interference with viewing area

• Materials:
All metallic contact parts are of stainless steel quality 1.4571.
Seals: PTFE

Downloads

Lumiglas Ex Motor Drive EMA I-Ex EEx d IIC T5 / Biogas Sight Glass with Light, Wiper and Camera System

Versatile, high-performance Ex-class motor drive with compact dimensions for numerous applications

  • Special advantages of the Lumiglas Ex-class motor drive:
    Especially in environments that require the remote  monitoring of processes in reactors (e. g. biogas plants), ex-type cameras are frequently mounted on sight glasses, enabling process engineers to observe what is going on in the vessel from a central control room, which is frequently located at some distance from the reactor itself.

This eliminates the need for physical presence at a reactor, frequently entailing safety-relevant situations made more difficult by adverse environmental conditions, e. g. bad weather.

In certain processes, problems can arise if there are deposits of the substance in the reactor on the sight glass screen, thus making it difficult or even impossible for the camera to view the process. This can be remedied by using one of the proven wipers from the Lumiglas range: SW I and SWII. These wipers are normally operated by hand when the observer wants to inspect the reactor.

In many cases, however, the remote observation of reactors, e. g. via Lumiglas camera technology, is mandatory, making it essential to install a motor-driven wiper that can be actuated remotely from the control room.

The Ex motor drive EMA I-Ex has been developed specifically for such applications.

Because remote observation is mainly carried out in potentially
explosive environments, an Ex-class motor drive is now available in addition to the Ex camera

 

  • The Ex-class motor drive is mainly intended for operating wipers on sight glasses and is suitable for short- or long-term operation.
  • Especially in environments that require the remote monitoring of processes in reactors
  • Compact overall size; high turning moment; excellent motor power; low energy consumption.
  • Approved for use in potentially explosive environments, Zones 1 and 2 as well as 21 and 22
  • Approved for use in ambient temperatures of between -20°C and +50°C
  • Type of protection: Terminal connection and motor enclosure IP68, motor shaft IP54

Small dimensions, great effectiveness:

The Ex-class motor drive is designed for both short-term and continuous  operations.

All development targets have been achieved:

  • Compact overall size; high turning moment; excellent motor
    power; low energy consumption.
  • The Ex motor drive is thus ideally suited for operating, for
    instance, Lumiglas screen wipers:
    a) SW I (the wiper blade axis passes through a hole in the
    sight glass) – for low pressure
    b) SW II (the wiper blade axis is operated from the side
    through a hole in the sight glass fitting by means of a
    flexible shaft) – for higher pressure

Combination with a spray facility is also possible.

Structure of compact unit:

  • The unit is made up of a DC electric motor with a flanged drive and special coupling by way of which (e. g.) the wiper axis of a screen wiper is turned. 

Biogas Sight Glass with Light, Wiper and Camera System

Biogas sight glass for digester tanks and methane digester tanks. Our light glass gasket creates a gas-tight seal by conforming to cement walls and ports used in digester tank construction. 

lumiglas biogas production packages

Downloads

Lumiglas Sight Glass Wiper SW II

product photo: Lumiglas Sight Glass Wiper SW II

Effective assembly for wiping clean glasses in sight glass fittings DIN 28120 – DN 100 to DN 200

For manually activated cleaning, when required, of inside face of glass in sight ports. Particularly suitable for pressure and vacuum, vessels requiring test certification both in explosion hazardous as well as non hazardous operating areas.

The glass discs fitted into the assemblies correspond to DIN 7080 or DIN 8902 standards.

Suitable for circular sight glass assemblies nominal size DN 100DN 200.

Pressure rating same as whole fitting up to 16 bar
All contact parts stainless steel

Manual wiper suited for DIN 28120 style sight glass. Requires threaded bore through sight glass assembly and weld pad.

  • Temperature: up to 220 C. (depending, however,  on type of glass disc used)
  • 316 stainless steel wetted metal parts 
  • Vacuum tight and up to 230 psig
  • All stainless construction with Teflon or Silicone wiper blade
  • Sizes: DN Sizes 100 to 200 DIN28120 sight glasses.

Possible combinations:

Simultaneous fittings of Lumistar luminaire, flame proof or standard design, is possible with the wiper SW ll BW, as is the fitting of a spray device

 

Downloads

Lumiglas Sight Glass Wiper SW I

product photo: Lumiglas Sight Glass Wiper SW I

Simple effective assembly for wiping clean circular sight glass discs
Maximum pressure 6 bar

Vacuum tight; pressure tight to at least 2 bar and, depending on glass diameter, to 6 bar. Max. permissible temperature 220°C (though this depends on glass type used).

Combine with circular sight/light fittings

All contact parts stainless steel, Hastelloy on request

Possible combinations:

  • Unit can simultaneously be combined with a spray device.
  • Combination with Lumistar luminaire mounted on the sight glass unit is possible from viewing dia. 125 (DIN 28120, DN 100)
    depending on luminaire size (see data sheet download below).
  • Lumistar luminaire series USL and ESL can also be combined with the unit.
  • With screwed sight glass assemblies combination with Lumistar luminaire SLM or Lumistar ME is possible with size DN 125.
  • Also available with ratchet-drive lever.

Overview:

  • For manual cleaning on inside glass surface
  • 316 stainless steel wetted metal parts
  • Vacuum tight and up to 85 psig  (pound-force per square inch gauge) @  (220°C)
  • Wiper blade available in Teflon or Silicone
  • Sizes: 80 to 225 mm OD (other sizes available)

Manual wiper for Lumiglas® sight glasses and sight windows. It may be used in combination with a with a spray ring or spray nozzle. Sight glass must be ordered with bore hole.

Downloads