Tag: sterile lighting

Posted on

Lumistar Luminaire ESL 27, stainless steel

Luminaires (Non-Ex)

Product Picture: Lumistar Luminaire ESL 27, stainless steel

Fully Sealed Lumistar Sight Glass Luminaire with cover glass, all stainless steel

For mounting onto sight glass fittings

The product is a universally applicable sight glass luminaire ideally suited for use on combined sight/light glass units (single flanged port arrangement) as well as for separate flanged ports.

Compact, high light output:

Dazzle free illumination; suits circular sight glass fittings to DIN 28120/DIN 28121 or similar as well as screwed sight glass assemblies similar to DIN 11851 and flow indicators. Sizes, depending on style, from DN 50 upward.

Large light aperture thanks to screwed lens ring design

Applications: suitable for pharmaceutical and food industries and especially for sterile areas!

For the illumination of flow indicators, pipelines, laboratory mixers, bioreactors as well as internals of tanks, pressure vessels stirred reactors and otherwise normally closed containers.

• Ex version also available
• Protection: Dust and water jet tight, IP65 to EN 60529/DIN VDE 0470 part 1

Suits Lumiglas Sight Glass Fitting, circular DIN 28120/28121 or similar from size DN 50 and Lumiglas Screwed Sight Glass Fitting MV from DN 100 to DN 150

Operating voltage: 12V, 24V, 120V, 230V, 240V Power, dependant on operating voltage, up to 100W  

Secured by hinged bracket or adapter flange

Modyfied by an inside mounting flange specially for Aseptik Technology

Please note that the halogen bulb 230 V – 75 Watt is no longer available.

Continue reading “Lumistar Luminaire ESL 27, stainless steel”

Posted on

Lumistar Luminaire USL 01, stainless steel

Luminaires (Non-Ex)

Product Picture: Lumistar Luminaire USL 01, stainless steel

Fully Sealed Lumistar Sight Glass Luminaire with cover glass, super compact, all stainless steel

Perfect combination of flush screwed assembly and smooth surface:

This sight glass luminaire is designed for mounting on sight glass fittings in universal applications. It is ideal for use in combined sight and light ports (single-flange version) or arranged separately (two-flange version). The integrated fastening clamp enables convenient mounting on a Lumiglas sight glass wiper assembly SW I.

Application in chemical, pharmaceutical, biogas and food processing  industries:

It is ideal for illuminating bioreactors, laboratory mixers and filters as well as the interiors of tanks, agitators, separators, pipelines and other, usually closed, vessels in non-explosive operating environments.

  • USL 01: for general applications, mounted with hinged bracket, clamp fastening or flanged adapter collar
  • USL 31: special variant for sterile environments with adapter collar for fitting over flanges, etc.

Lumiglas luminaire USL 01 and USL 31 fit the following sizes:

a) Circular sight glass fitting to DIN 28120: from DN 25 
b) Circular sight glass fitting to DIN 28121: from DN 40
c) Visual flow indicators: from DN 25
d) Screw-type sight glass fittings similar to DIN 11851: from DN 50

Operating voltage/power:  12V, 24V / 5W, 20W 

Secured by mounting clamp (for SW I) or hinged bracket

• Protection class: Dust- and waterjet proof, IP 65 according to EN 60 529 / DIN VDE 0470, Part 1

Continue reading “Lumistar Luminaire USL 01, stainless steel”

Posted on

Lumistar Luminaire USL 33 and USL 35, stainless steel

Luminaires (Non-Ex)

Product Picture: Lumistar Luminaire USL 33 and USL 35, stainless steel

Also available in LED technology

Fully Sealed Lumistar Sight Glass Luminaire with cover glass, compact, all stainless steel

Suits for sanitary sight glass fittings with METAGLASS in Bio-Control or NA-Connect fittings

Operating voltage/power:
12 V, 24 V, 120 V, 230 V / 20 W, 50 W, 100 W

Downloads

Posted on

Lumistar Luminaire USL 31, stainless steel

Luminaires (Non-Ex)

Product Picture: Lumistar Luminaire USL 31, stainless steel
Mini Lumistar luminaires: USL 01 and USL 31, stainless steel

Fully Sealed Lumistar Sight Glass Luminaire with cover glass, compact, all stainless steel

USL 01: for general applications, mounted with hinged bracket, clamp fastening or flanged adapter collar
USL 31: special variant for sterile environments with adapter collar for fitting over flanges, etc. 

Perfect combination of flush screwed assembly and smooth surface:

This sight glass luminaire is designed for mounting on sight glass fittings in universal applications.

It is ideal for illuminating bioreactors, laboratory mixers and filters as well as the interiors of tanks, agitators, separators, pipelines and other, usually closed, vessels in non-explosive operating environments.

It is ideal for use in combined sight and light ports (single-flange version) or arranged separately (two-flange version). The integrated fastening clamp enables convenient mounting on a Lumiglas sight glass wiper assembly SW I.

Compact design; powerful light output:

Glare-free illumination; suitable for use with circular sight glass fittings to DIN 28120 / DIN 28121 or similar, or with screw-type sight glass fittings in compliance with DIN 11851.

Application in chemical, pharmaceutical, biogas and food processing industries:

Protection class: Dust- and waterjet proof, IP 65 according to EN 60 529 / DIN VDE 0470, Part 1

Outside diameter: 24 mm
Light output = 14 mm
Operating voltage/power: 12 V / 5 W or 24 V / 20 W

Downloads

Posted on

Lumistar Luminaire USL 15-LED and USL 35-LED, stainless steel

Luminaires (Non-Ex)

Lumistar luminaires USL 15 and USL 35 and UL-  Listed types, stainless steel

Product Picture: Lumistar Luminaire USL 15-LED and USL 35-LED, stainless steel

 

This sight glass luminaire is designed for universal applications.

Application in chemical, pharmaceutical, biogas and food processing  Industries:

It is ideal for illuminating bioreactors, laboratory mixers and filters as well as the interiors of tanks, agitators, separators, pipelines and other, usually closed, vessels in non-explosive operating environments.

It is ideal for use in combined sight and light ports (single-flange version) or with two separate ports (2-flange version).

Compact design, powerful light output:

Glare-free illumination; suitable for circular sight glass fittings to DIN  28120/DIN 28121 or similar, for screw-type sight glass fittings in compliance with DIN 11851, and for METAGLAS® and BioControl fittings.

Protection class: Dust- and waterjet proof, IP 65 according to EN 60 529 / DIN VDE 0470, Part 1

Voltage type: AC/DC
Operating voltage: 12  V, 24  V, 120  V, 230  V
Wattage: up to 100 W, depending on operating voltage

Transformers: Transformers for 12 V or 24 V secondary voltage can be supplied on request.

Push-button:  Luminaires with a wattage of 50 W and more should only be operated by push-button (not in continuous mode). Should an integrated push-button not be included in the order/ scope of supply, it is essential for an external momentary-contact push-button or a timer to be installed in the power supply line, outside the luminaire! Under no circumstances should the maximum temperatures specified for the luminaire be exceeded.

Mounting Options:
Secure to sightport flange with stainless steel bracket or mount directly to a Sanitary (e.g. Tri-Clamp® ferrule or NA-Connect® ) fitting for sterile  applications.

Overview:

  • Insensitive to vibration
  • No heat radiation in the light port (cold light)
  • No additional heat which would be undesirable for chemical and/or biological processes
  • Extreme high-contrast lighting

Features:

  •  Fit & Forget – Extremely long operating life and reliability
  • Durability – Impact & Vibration resistant
  • No heat radiation from lens -Will not heat product in vessel
  • Low energy consumption – Requires only 15 watts

Downloads

Posted on

Lumistar Luminaire ESL 51-LED, stainless steel

Luminaires (Non-Ex)

Product Picture: Lumistar Luminaire ESL 51-LED, stainless steel

Ideal combination of flush design and smooth surface:

This sight glass luminaire is designed for mounting on sight glass fittings in universal applications. 

Applications in the chemical, pharmaceutical, biogas and food processing industries: 

For illuminating the interior of vessels, tanks, agitators, silos and other generally closed containers and reactors and also in visual flow indicators in non-explosive environments.

It is practical either in combined sight and light ports (single-flange version) or with separate ports 2-). Integrated fastening clamp enables attachment to Lumiglas wiper unit SW I.

ESL 51-LED-HK: with bracket for SW I (wiper unit)
ESL 51-LED-KS: with hinged bracket for general use
ESL 51-LED-B: special sterile version for flange attachment for fitting over flanges, collars, etc.

Protection class: dust-tight and water jet-proof, IP 65 acc. to EN 60 529 / DIN VDE 0470 part 1

Lumistar ESL 51-LED luminaires fit the following nominal sizes:
a) Circular sight glass fittings acc. to DIN 28120: from DN 25
b) Circular sight glass fittings acc. to DIN 28121: from DN 40
c) Visual flow indicators: from DN 25
d) Screw-type sight glass fittings in compliance with DIN 11851: from DN 40

Voltage type: AC/DC
Operating voltage: 24 V
Output: 2.5 W

Transformers or AC/DC converters for on-site installation or for installing in a control cabinet are available on request.

(Transformer: 230 V AC – 24 V AC)
(AC/DC converter: 230 V AC – 24 V DC)

Downloads

Posted on

Lumistar Luminaire ESL 53-LED, stainless steel

Luminaires (Non-Ex)

Product Picture: Lumistar Luminaire ESL 53-LED, stainless steel

This sight glass luminaire is designed for universal applications and is ideal either in combined sight and light ports (single-flange version) or with separate ports (two-flange version).

Applications in the chemicals, pharmaceutical, biogas and food processing industries:

For illuminating the interior of vessels, tanks, agitators, silos and other generally closed containers and reactors and also in visual flow indicators in non-explosive environments.

Compact design, powerful light output:

Glare-free illumination; fits circular sight glass fittings to DIN 28120/DIN 28121 or similar, screw-type sight glass fittings in compliance with DIN 11851, as well as METAGLAS® and BioControl fittings.

Protection class: dust-tight and water jet-proof, IP 65 acc. to EN 60 529 / DIN VDE 0470 part 1

Voltage type: AC/DC
Operating voltage: 24 V AC/DC
Output: 7 W

Transformers for 230 V AC / 24 V AC are available
on request

ESL 53-LED-KS: for general use with hinged bracket
ESL 53-LED-B: special sterile version for flange attachment for fitting over flanges, collars, etc.

Overview:

Insensitive to vibration
No heat radiation in the light port (cold light)
No additional heat which would be undesirable for chemical
and/or biological processes
Extreme high-contrast lighting

Downloads

Posted on

Lumistar Luminaire ASL 55-LED, aluminium

Luminaires (Non-Ex)

Product Picture: Lumistar Luminaire ASL 55-LED, aluminium

Lumistar Luminaires ASL 55-LED (aluminium) and ESL 55-LED (stainless steel)

Sight glass luminaire for universal applications; ideally suited for sight glass and light port combinations (single-flange version) and for separate  configurations (double-flange version).

Applications:

The optimum solution in the pharmaceutical and food processing industries, ideal for illuminating bioreactors, laboratory mixers and filters as well as the interiors of boilers, tanks, agitators, separators, pipes and other – usually sealed – vessels in operating environments that are not potentially explosive.

The specific advantages of Lumiglas LED technology:

  • Insensitive to vibration
  • Long service life and high operational reliability
  • Continuous operation for LED up to about 50,000 hours
  • The ideal solution wherever fittings are difficult to access
  • No heat radiation in the light port (cold light)
  • No additional heat which would be undesirable for chemical and/or biological processes
  • Extreme high-contrast lighting

Compact yet powerful:

Dazzle-free illumination; suitable for use with circular sight glass fittings to DIN28120/DIN28121 or similar, with screw-type sight glass fittings in compliance with DIN 11851, and in sight flow indicators.

Type of protection: Dust-tight and waterjet-proof, IP 65 acc. to EN 60529/
DIN VDE 0470, Part 1

Electrical data:

Convenient electrical link-up: The Lumistar luminaire is equipped with a factory-mounted screwed cable gland.

The Lumistar luminaire ASL-/ESL 55-LED is compatible with the following nominal diameters:
a) Circular sight glass fitting acc. to DIN 28120: DN 40
b) Circular sight glass fitting acc. to DIN 38121: DN 40
c) Sight glasses in flow indicators: DN 50
d) Screw-type sight glass fittings similar to DIN 11851:
– DN 50 is mounted by way of a separate flange attachment
– From DN 80 up, the unit is secured using the hinged bracket

Lumistar luminaires ASL 55-LED and ESL 55-LED have a special adapter in the light port as a standard feature, making this type of lamp ideal for applications in aseptic and sterile environments. Excellent results are assured by using sight glasses fused to a metal frame (METAGLAS®) and with the BioControl (NEUMO) range of products. METAGLAS® combines optimally with clamp fittings (METACLAMP®) as well as with NA-ConnectTM technology.

Downloads

Posted on

Lumistar Luminaires USL 13-UL and USL 33-UL, stainless steel

Luminaires (Non-Ex)

Product Picture: Lumistar Luminaires USL 13-UL and USL 33-UL, stainless steel

Lumistar luminaires stainless steel USL 13 and USL 33 and UL-listed types

Fully Sealed Lumistar Sight Glass Luminaire with cover glass, compact, all stainless steel

This sight glass luminaire is designed for universal applications. It is ideal for use in combined sight and light ports (single-flange version) or for two separate ports (2-flange version).

Application in chemical, pharmaceutical, biogas and food processing  industries:

It is ideal for illuminating bioreactors, laboratory mixers and filters as well as the interiors of tanks, agitators, separators, pipelines and other, usually closed, vessels in non-explosive operating environments.

 Ultra-bright LED provides 1000 lumens

Compact design, powerful light output:

Glare-free illumination; suitable for circular sight glass fittings to DIN  28120/DIN 28121 or similar, for screw-type sight glass fittings in compliance with DIN 11851, and for METAGLAS® and BioControl fittings.

Protection class: Dust- and waterjet proof, IP 65 according to EN 60 529 / DIN VDE 0470, Part 1

Suits all Lumiglas Sight Glass Fittings from size DN 25
Operating voltage/power: 12 V, 24 V, 120 V / 20 W, 50 W

USL 13: for general applications, mounted with hinged bracket
USL 33: special variant for sterile environments with adapter collar for fitting over flanges, etc.

Lumistar luminaire USL 13 and USL 33 fit the following sizes:
a) Circular sight glass fitting acc. to DIN 28120: from DN 25
b) Circular sight glass fitting acc. to DIN 28121: from DN 40
c) Visual flow indicators: from DN 25
d) Screw-type sight glass fittings in compliance with DIN 11851: from DN 50

Downloads

Posted on

Lumistar Luminaire ESL 27-Ex, stainless steel

Luminaires (Ex)

Product Picture: Lumistar Luminaire ESL 27-Ex, stainless steel

ex II 2G Ex de IIC T3/T4 Gb
ex II 2G Ex tb IIIC T195°C T130°C T80°C Db

Suitable for Explosion hazardous areas

This Ex-type sight glass luminaire is designed for universal applications in potentially explosive environments. It is ideal for use in combined sight and light glass units, either as a single flange version or with two separate flanged ports.

For illuminating visual flow indicators, pipelines, laboratory mixers, and bioreactors as well as the interior of tanks, hoppers, silos, agitators and other – normally closed – vessels in potentially explosive environments – Gas: Zones 1 and 2; Dust: Zones 21 and 22.

Compact yet powerful:

Dazzle-free illumination; suitable for use with circular sight glass fittings to DIN 28120/DIN 28121 or similar, with screw-type sight glass fittings in compliance with DIN 11851, and in visual flow indicators.

Optimum screw-in lens design ensures maximum light efficiency and convenient access when replacing lamps.

Ideal for applications in sterile areas.

Protection: IP 65 and IP 67 to DIN EN 60529

Temperature Class: T4/50W; T6/20W
Ambient temperature: up to 40 C
Suits circular sight glass fittings to DIN 28120/28121 or similar from size DN 50 and screwed sight glass fittings DIN 11851 from DN 100

Operating Voltage 12 V, 24 V, 120 V, 230 V, 240 V

Power, depending on temperature class: up to 50 W

Secured by hinged bracket or adapter flange
modyfied by an inside mounting flange specially for Aseptik Technology

Downloads

Posted on

Lumistar Luminaire ESL 55-LED-Ex, stainless steel

Luminaires (Ex)

Product Picture: Lumistar Luminaire ESL 55-LED-Ex, stainless steel

ex II 2G Ex d IIC T6 Gb
ex II 2D Ex tb IIIC T80° Db

Suitable for Explosion hazardous areas

This Ex-type sight glass luminaire is designed for universal applications and is ideal for use in combined sight and light ports (single-flange version) or with two separate ports (2-flange version).

For illuminating visual flow indicators, pipelines, laboratory mixers, bio-reactors as well as the interior of tanks, hoppers, silos, agitators and other, normally closed, vessels and reactors in potentially explosive environments.  Gas: Zones 1 and 2, Dust: Zones 21 and 22.

 The special advantages of Lumiglas LED technology:

  • vibration-proof
  • long service life and operational reliability
  • continuous LED operation up to around 50,000 hours
  • optimal for fittings that are difficult to access
  • no heat radiation in the light aperture (cold light)
  • no unwanted additional heat in chemical and/or biological processes
  •  extremely high-contrast illumination

Compact design, powerful light output:

Glare-free illumination; suitable for circular sight glass fittings to DIN 28120/DIN 28121 or similar, for screw-type sight glass fittings in compliance with DIN 11851 and for sight glass fittings on flow indicators.

Ideal for applications in sterile areas

Protection class: IP 65 and IP 67 acc. to DIN EN 60529

Temperature Class: to T6
Ambient temperature: up to 40°C
Suits circular sight glass fittings to DIN 28120/28121 or similar from size DN 40 and screwed sight glass fittings DIN 11851 from DN 65

Operating Voltage 24 V, 120 V-230 V Power 11 W
Secured by hinged bracket or adapter flange
modified by an inside mounting flange specially for Aseptik Technology

Downloads

Posted on

Lumistar Luminaire ASL 57LED-Ex, aluminium

Luminaires (Ex)

Product Picture: Lumistar Luminaire ASL 57LED-Ex, aluminium

ex II 2G Ex d(e) IIC T6 Gb
ex II 2D Ex tb IIIC T80°C Db

Suitable for Explosion hazardous areas

This Ex-type sight glass luminaire is designed for universal applications and is ideal for use in combined sight and light ports (single-flange version) or with two separate ports (2-flange version).

For illuminating visual flow indicators, pipelines, laboratory mixers, bio-reactors as well as the interior of tanks, hoppers, silos, agitators and other, normally closed, vessels and reactors in potentially explosive environments.

The specific advantages of Lumiglas LED technology:

  • vibration-resistant
  • long service life and operational reliability
  • LED functions up to around 50,000 hours in continuous operations
  • optimal for fittings that are difficult to access
  • no heat radiation in the light aperture (cold light)
  • no unwanted additional heat in chemical and/or biological processes
  • extremely high-contrast illumination

Compact design, powerful light output:

Glare-free illumination; suitable for circular sight glass fittings to DIN 28120/DIN 28121 or similar, for screw-type sight glass fittings in compliance with DIN 11851, from size DN 40 and for sight glass fittings on flow indicators from DN 65 .

Protection class: IP 65

Temperature Class: to T6
Ambient temperature: up to 40°C

High operating time by Hi-Power LED’s

Voltage type: AC/DC

Operating Voltage 24 V, 120 V-230 V
Power 11 W

Secured by hinged bracket or adapter flange

Downloads

Posted on

Lumistar Luminaire REL 01/REL 01-Ex, Stainless Steel – Rectangular Light Series

Luminaires (Ex)

Product Picture: Lumistar Luminaire REL 01-Ex, stainless steel

ex II 2G Ex ia C T4/T5/T6 – intrinsically safe
ex I M2 Ex ia I Mb

Also comes in non-Ex

Lumiglas supply this stainless glass luminaire in two versions for use in potentially explosive environments and for normal operating conditions.

Designed for use with rectangular / longitudinal sight glass units; installed in bioreactors, laboratory mixers, filters and, generally, all normally closed tanks, agitators, separators, pipelines and other vessels operated in explosion-hazardous environments (Zones 1 and 2) as well as in non-hazardous work areas.

Suitable for use in the food processing sector

The Lumistar luminaire REL 01/REL 01-Ex is a complete unit ready for fitting. It is attached directly to the cover flange of a rectangular sight glass unit by means of two screws.

The REL01 unit has been designed to fit snugly into the side of rectangular / longitudinal sightglasses, length = 250 mm
The Luminaire REL 01 comes ready for fitting, 2 screws enable it to be bolted straight onto the cover flange of the longitudinal sightglass.

Compact design, high light output, low energy consumption:

21 special LEDs ensure dazzle-free illumination.

Together with the corresponding electronic switchgear, these LED are resin-cast into the stainless steel housing which is then secured to the rectangular fitting.

The service life of this luminaire is virtually unlimited; even if one of the diodes fails after a long period of operation, the remaining LED still provide more than enough light intensity.

Type of protection: Provided the luminaire has been properly installed, it is dust- and splash-proof, IP 65  acc. to DIN EN 60529/DIN VDE 0470 Part 1

Operating Voltage / Power: 24V / 2W

Where the Luminaire is to be used in explosion hazardous areas, connection must be to an intrinsically safe power supply circuit.

Downloads