Lumistar Luminaire USL08LED-Ex-UL

Lumistar Luminaire USL08LED-Ex, UL-listed + T6

 

  • UL-listed
  • Temperature class T6 at a Ambient temperature up to 50°C
  • Extended voltage range (120 – 240 V AC)
  • Subsequent change of the radiation angle possible
    (15°, 25°, 35°)
  • LED technology with more efficient light output
    compared to the halogen version
  • Can be exchanged for the old halogen version 1:1, as the housing and the fixings have not changed on the outside

The Lumistar USL08 with UL/cUL Ex-listed is now also available in LED technology and can be are manufactured and sold. The approval includes the following technical details:

Voltage range: 120-240V
Approved for: − Class I Div. 1 and 2, Groups C and D, temperature class T6 at max. ambient temperature 50°C
− Class I Div. 2 Groups A, B, C, D, temperature class T2

There are two versions with different radiation angles and light colours:

Version 1:

  • Lumistar USL08LED-Ex with LED chip. (COB Version à Chip on Board)
  • Light output max. 2200 lumen
  • With this version, a subsequent lens change by the customer is possible. (possible radiation angles 15°,25°,35°)


Part no :
LS#3542.501.00 incl. 15° lens
LS#3542.502.00 incl. 25° lens
LS#3542.503.00 incl. 35° lens
Version 2:
Lumistar USL08LED-Ex with the 7-gang LED card from the Lumistar luminaires USL07LED or ESL/ ASL55 LED
Light output max. 1600 lumen (for applications where too high light output can cause glare,  e.g : (small boilers)
Part no :
LS#3542.504.00 incl. 11° lens
LS#3542.505.00 incl. 26° lens
Available: immediately
Delivery time: 2-3 weeks
Price (net): Euro 725,00
Attachment: Data Sheet

Lumistar Luminaire USL 05, aluminium

Product Picture: Lumistar Luminaire USL 05, aluminium

Also available in LED technology

Fully Sealed Lumistar Sight Glass Luminaire with cover glass
Compact yet powerful light

Suits Lumiglas Sight Glass Fitting, circular DIN 28120/28121 or similar from size DN 40 and Lumiglas Screwed Sight Glass Fitting MV from DN 65

Operating voltage/power: 24V / 20W or 50W (without internal transformer) 120V / 230W, 12V / 5W (with internal transformer)
Secured by hinged bracket or adapter flange

Downloads

Lumistar Luminaire ESL 27, stainless steel

Luminaires (Non-Ex)

Product Picture: Lumistar Luminaire ESL 27, stainless steel

Fully Sealed Lumistar Sight Glass Luminaire with cover glass, all stainless steel

For mounting onto sight glass fittings

The product is a universally applicable sight glass luminaire ideally suited for use on combined sight/light glass units (single flanged port arrangement) as well as for separate flanged ports.

Compact, high light output:

Dazzle free illumination; suits circular sight glass fittings to DIN 28120/DIN 28121 or similar as well as screwed sight glass assemblies similar to DIN 11851 and flow indicators. Sizes, depending on style, from DN 50 upward.

Large light aperture thanks to screwed lens ring design

Applications: suitable for pharmaceutical and food industries and especially for sterile areas!

For the illumination of flow indicators, pipelines, laboratory mixers, bioreactors as well as internals of tanks, pressure vessels stirred reactors and otherwise normally closed containers.

• Ex version also available
• Protection: Dust and water jet tight, IP65 to EN 60529/DIN VDE 0470 part 1

Suits Lumiglas Sight Glass Fitting, circular DIN 28120/28121 or similar from size DN 50 and Lumiglas Screwed Sight Glass Fitting MV from DN 100 to DN 150

Operating voltage: 12V, 24V, 120V, 230V, 240V Power, dependant on operating voltage, up to 100W  

Secured by hinged bracket or adapter flange

Modyfied by an inside mounting flange specially for Aseptik Technology

Please note that the halogen bulb 230 V – 75 Watt is no longer available.

Continue reading “Lumistar Luminaire ESL 27, stainless steel”

Lumistar Luminaire USL 15-LED and USL 35-LED, stainless steel

Luminaires (Non-Ex)

Lumistar luminaires USL 15 and USL 35 and UL-  Listed types, stainless steel

Product Picture: Lumistar Luminaire USL 15-LED and USL 35-LED, stainless steel

 

This sight glass luminaire is designed for universal applications.

Application in chemical, pharmaceutical, biogas and food processing  Industries:

It is ideal for illuminating bioreactors, laboratory mixers and filters as well as the interiors of tanks, agitators, separators, pipelines and other, usually closed, vessels in non-explosive operating environments.

It is ideal for use in combined sight and light ports (single-flange version) or with two separate ports (2-flange version).

Compact design, powerful light output:

Glare-free illumination; suitable for circular sight glass fittings to DIN  28120/DIN 28121 or similar, for screw-type sight glass fittings in compliance with DIN 11851, and for METAGLAS® and BioControl fittings.

Protection class: Dust- and waterjet proof, IP 65 according to EN 60 529 / DIN VDE 0470, Part 1

Voltage type: AC/DC
Operating voltage: 12  V, 24  V, 120  V, 230  V
Wattage: up to 100 W, depending on operating voltage

Transformers: Transformers for 12 V or 24 V secondary voltage can be supplied on request.

Push-button:  Luminaires with a wattage of 50 W and more should only be operated by push-button (not in continuous mode). Should an integrated push-button not be included in the order/ scope of supply, it is essential for an external momentary-contact push-button or a timer to be installed in the power supply line, outside the luminaire! Under no circumstances should the maximum temperatures specified for the luminaire be exceeded.

Mounting Options:
Secure to sightport flange with stainless steel bracket or mount directly to a Sanitary (e.g. Tri-Clamp® ferrule or NA-Connect® ) fitting for sterile  applications.

Overview:

  • Insensitive to vibration
  • No heat radiation in the light port (cold light)
  • No additional heat which would be undesirable for chemical and/or biological processes
  • Extreme high-contrast lighting

Features:

  •  Fit & Forget – Extremely long operating life and reliability
  • Durability – Impact & Vibration resistant
  • No heat radiation from lens -Will not heat product in vessel
  • Low energy consumption – Requires only 15 watts

Downloads

Lumistar Luminaire ESL 26-Ex, stainless steel

Luminaires (Ex)

Product Picture: Lumistar Luminaire ESL 26-Ex, stainless steel

ex II 2G Ex de IIC T3/T4 Gb
ex II 2D Ex tb IIIC T195°C T130°C Db

Suitable for Explosion hazardous areas

This Ex-type sight glass luminaire is designed for universal applications in potentially explosive environments.

For illuminating the interior of tanks, hoppers, silos, agitators and other – normally closed – vessels as well as visual flow indicators in potentially explosive environments

Suitable for use in food processing industries.

It is ideal for use in combined sight and light-glass arrangements, either as a single flange version or with two separate flanged ports.

Compact yet powerful: Dazzle-free illumination; for use with circular sight glass fittings to DIN 28120/DIN 28121 or similar, with screw-type sight glass fittings in compliance with DIN 11851, and in visual flow indicators.

Optimum screw-in lens design ensures maximum light efficiency 

Gas: Zones 1 and 2; Dust: Zones 21 and 22.

Protection: IP 65 and IP 67 to DIN EN 60529

Temperature Class: to T4 (depending on power rating)
Ambient temperature: up to 60°C

Suits circular sight glass fittings to DIN 28120/28121 or similar from size DN 50 and screwed sight glass fittings DIN 11851 from DN 65 to DN100

Voltage type: Alternating/direct current, depending on lamp

Operating Voltage 12 V, 24 V, 120 V, 230 V, 240 V
Power, depending on voltage: up to 50W
Electric connection: terminal box and cable gland
Secured by hinged bracket or adapter flange

Please note that the halogen bulb 230 V – 75 Watt is no longer available.

Downloads

Lumistar Ex Light Guide Luminaire Lumiflex Type USL 07 ALF-Ex, aluminium

Luminaires (Ex)

Product Picture: Lumistar Ex Light Guide Luminaire Lumiflex Type USL 07 ALF-Ex, aluminium

ex II 2G Ex de IIC T6/T4 Gb
ex II 2D Ex tb IIIC T80°/130°C Db

For use in Ex-hazardous areas

The Lumiglas® Series USL 07-Ex is a small, high intensity light that provides versatile illumination of process vessel interiors in locations where explosion-proof lighting is required.

For illuminating individual processes and/or the interior of reactors,  containers, apparatuses, etc. in potentially explosive environments in Zones 1 and 2 as well as Zones 21 and 22.

For mounting on sight glass fittings; particularly for the selective illumination of processes on machines and reactors with limited space, especially in potentially explosive operating areas.

This Lumiglas luminaire has been specifically developed for light guide applications:

– Economical power consumption
– Low maintenance: lamp service life of up to 6,000 hours
– Flexible light guide made of stainless steel
– Easy to clean

Protection: IP 65 and IP 67 acc. to DIN EN 60 529

Temperature class: up to T6
Ambient temperature: up to 60°C
for the localised illumination of process operations at machines and internals of reactors; Specially developed for Light guide duties
Power supply see data sheet

Please note that the halogen bulb 230 V – 75 Watt is no longer available.

Downloads