Tag: inert gas

Posted on

Lumiglas Spray Device

product photo: Lumiglas Spray Device

• Combination with other features:
Can be combined simultaneously with Lumiglas luminaire and wiper. Care must, however, be taken that max. permissible operating temperature and resistance to temperature cycling for the relevant glass disc are considered.

Use to jet spray water, inert gas or other fluid to maintain glass visibility

• Application:
For intermittent or continuous automatic cleaning of underside of sight port glass disc. Suitable for pressure and vacuum vessels subject to pressure test certification for all standard ratings and use in explosion hazardous as well as non hazardous areas.

No interference with viewing area

• Materials:
All metallic contact parts are of stainless steel quality 1.4571.
Seals: PTFE

Downloads

Posted on

Lumiglas Tubular Sight Glass/Flow Indicator

Flanged at both ends DIN 2642 mating sizes PN 10 for fitting into pipelines

Length over flange: DIN 3202 F1

Application:
For visual control of state of fluid and flow in pipelines

Sizes from DN10 to DN200, also available with ANSI flanges
Stainless steel 1.4571(316Ti) flanges or other on request
Metal-(1.4301) or Plexi-glass outer shell for extra protection on request

Operating conditions:
Operating pressure: up to 6 bar, depending on wall thickness (higher ratings on request)

Operating temperature: up to 220°C

Materials of components referred to in adjoining exploded view (within data  sheet below):
Item Part Material
1 Connecting flange Stainless steel 1.4571 or other
2 Glass cylinder Borosilicate glass (DURAN)
3 Ring seals Silicon rubber or other
4 Spacer bars Stainless steel 1.4301 or other
5 Securing bolts A 2 or other
(with spring washer)

Special versions:
– with stainless steel or protective Plexiglas outer shell
– ANSI flanges
– customized length

Installation:
– The flow indicator is bolted, using suitable gaskets, directly between the mating flanges of the pipeline.
– The flow indicator should be fitted so that no stresses (tensile, compression or torsional) are caused on tightening up.

Ordering information:
e. g. Lumiglas tubular sightglass/flow indicator DN 100, material 1.4571, borosilicate glass, 6 bar operating pressure,
length over flanges 350

product photo: Lumiglas Tubular Sight Glass/Flow Indicator

Downloads