Tag: gasket

Posted on

Lumiglas Sight Glass Wiper SW I

product photo: Lumiglas Sight Glass Wiper SW I

Simple effective assembly for wiping clean circular sight glass discs
Maximum pressure 6 bar

Vacuum tight; pressure tight to at least 2 bar and, depending on glass diameter, to 6 bar. Max. permissible temperature 220°C (though this depends on glass type used).

Combine with circular sight/light fittings

All contact parts stainless steel, Hastelloy on request

Possible combinations:

  • Unit can simultaneously be combined with a spray device.
  • Combination with Lumistar luminaire mounted on the sight glass unit is possible from viewing dia. 125 (DIN 28120, DN 100)
    depending on luminaire size (see data sheet download below).
  • Lumistar luminaire series USL and ESL can also be combined with the unit.
  • With screwed sight glass assemblies combination with Lumistar luminaire SLM or Lumistar ME is possible with size DN 125.
  • Also available with ratchet-drive lever.

Overview:

  • For manual cleaning on inside glass surface
  • 316 stainless steel wetted metal parts
  • Vacuum tight and up to 85 psig  (pound-force per square inch gauge) @  (220°C)
  • Wiper blade available in Teflon or Silicone
  • Sizes: 80 to 225 mm OD (other sizes available)

Manual wiper for Lumiglas® sight glasses and sight windows. It may be used in combination with a with a spray ring or spray nozzle. Sight glass must be ordered with bore hole.

Downloads

Posted on

Lumiglas Tubular Sight Glass/Flow Indicator

Flanged at both ends DIN 2642 mating sizes PN 10 for fitting into pipelines

Length over flange: DIN 3202 F1

Application:
For visual control of state of fluid and flow in pipelines

Sizes from DN10 to DN200, also available with ANSI flanges
Stainless steel 1.4571(316Ti) flanges or other on request
Metal-(1.4301) or Plexi-glass outer shell for extra protection on request

Operating conditions:
Operating pressure: up to 6 bar, depending on wall thickness (higher ratings on request)

Operating temperature: up to 220°C

Materials of components referred to in adjoining exploded view (within data  sheet below):
Item Part Material
1 Connecting flange Stainless steel 1.4571 or other
2 Glass cylinder Borosilicate glass (DURAN)
3 Ring seals Silicon rubber or other
4 Spacer bars Stainless steel 1.4301 or other
5 Securing bolts A 2 or other
(with spring washer)

Special versions:
– with stainless steel or protective Plexiglas outer shell
– ANSI flanges
– customized length

Installation:
– The flow indicator is bolted, using suitable gaskets, directly between the mating flanges of the pipeline.
– The flow indicator should be fitted so that no stresses (tensile, compression or torsional) are caused on tightening up.

Ordering information:
e. g. Lumiglas tubular sightglass/flow indicator DN 100, material 1.4571, borosilicate glass, 6 bar operating pressure,
length over flanges 350

product photo: Lumiglas Tubular Sight Glass/Flow Indicator

Downloads