Fully Sealed Lumistar Sight Glass Luminaire with cover glass, all stainless steel
For mounting onto sight glass fittings
The product is a universally applicable sight glass luminaire ideally suited for use on combined sight/light glass units (single flanged port arrangement) as well as for separate flanged ports.
Compact, high light output:
Dazzle free illumination; suits circular sight glass fittings to DIN 28120/DIN 28121 or similar as well as screwed sight glass assemblies similar to DIN 11851 and flow indicators. Sizes, depending on style, from DN 50 upward.
Large light aperture thanks to screwed lens ring design
Applications: suitable for pharmaceutical and food industries and especially for sterile areas!
For the illumination of flow indicators, pipelines, laboratory mixers, bioreactors as well as internals of tanks, pressure vessels stirred reactors and otherwise normally closed containers.
• Ex version also available • Protection: Dust and water jet tight, IP65 to EN 60529/DIN VDE 0470 part 1
Suits Lumiglas Sight Glass Fitting, circular DIN 28120/28121 or similar from size DN 50 and Lumiglas Screwed Sight Glass Fitting MV from DN 100 to DN 150
Operating voltage: 12V, 24V, 120V, 230V, 240V Power, dependant on operating voltage, up to 100W
Secured by hinged bracket or adapter flange
Modyfied by an inside mounting flange specially for Aseptik Technology
Please note that the halogen bulb 230 V – 75 Watt is no longer available.
Fully Sealed Lumistar Sight Glass Luminaire with cover glass, super compact, all stainless steel
Perfect combination of flush screwed assembly and smooth surface:
This sight glass luminaire is designed for mounting on sight glass fittings in universal applications. It is ideal for use in combined sight and light ports (single-flange version) or arranged separately (two-flange version). The integrated fastening clamp enables convenient mounting on a Lumiglas sight glass wiper assembly SW I.
Application in chemical, pharmaceutical, biogas and food processing industries:
It is ideal for illuminating bioreactors, laboratory mixers and filters as well as the interiors of tanks, agitators, separators, pipelines and other, usually closed, vessels in non-explosive operating environments.
USL 01: for general applications, mounted with hinged bracket, clamp fastening or flanged adapter collar
USL 31: special variant for sterile environments with adapter collar for fitting over flanges, etc.
Lumiglas luminaire USL 01 and USL 31 fit the following sizes:
a) Circular sight glass fitting to DIN 28120: from DN 25
b) Circular sight glass fitting to DIN 28121: from DN 40
c) Visual flow indicators: from DN 25
d) Screw-type sight glass fittings similar to DIN 11851: from DN 50
Operating voltage/power: 12V, 24V / 5W, 20W
Secured by mounting clamp (for SW I) or hinged bracket
• Protection class: Dust- and waterjet proof, IP 65 according to EN 60 529 / DIN VDE 0470, Part 1
Ideal combination of flush design and smooth surface:
This sight glass luminaire is designed for mounting on sight glass fittings in universal applications.
Applications in the chemical, pharmaceutical, biogas and food processing industries:
For illuminating the interior of vessels, tanks, agitators, silos and other generally closed containers and reactors and also in visual flow indicators in non-explosive environments.
It is practical either in combined sight and light ports (single-flange version) or with separate ports 2-). Integrated fastening clamp enables attachment to Lumiglas wiper unit SW I.
ESL 51-LED-HK: with bracket for SW I (wiper unit) ESL 51-LED-KS: with hinged bracket for general use ESL 51-LED-B: special sterile version for flange attachment for fitting over flanges, collars, etc.
Protection class: dust-tight and water jet-proof, IP 65 acc. to EN 60 529 / DIN VDE 0470 part 1
Lumistar ESL 51-LED luminaires fit the following nominal sizes:
a) Circular sight glass fittings acc. to DIN 28120: from DN 25
b) Circular sight glass fittings acc. to DIN 28121: from DN 40
c) Visual flow indicators: from DN 25
d) Screw-type sight glass fittings in compliance with DIN 11851: from DN 40
Voltage type: AC/DC Operating voltage: 24 V Output: 2.5 W
Transformers or AC/DC converters for on-site installation or for installing in a control cabinet are available on request.
(Transformer: 230 V AC – 24 V AC)
(AC/DC converter: 230 V AC – 24 V DC)
Similar to the internationally renowned Lumiglas luminaires, the camera system can be attached to the cover flange of asight glass fitting using a hinged bracket. If the standard illumination of the process is not sufficient, an additionalLumiglas luminairecan be attached if fitting allows.
Application check list
Please make use of our system conformity for your application of the VISULEX-Lumiglas-camera system so that we are able to submit a correct offer fitting your specific application.
ex II 2G Ex d IIC T6 Gb
ex II 2D Ex tb IIIC T80° Db
Suitable for Explosion hazardous areas
This Ex-type sight glass luminaire is designed for universal applications and is ideal for use in combined sight and light ports (single-flange version) or with two separate ports (2-flange version).
For illuminating visual flow indicators, pipelines, laboratory mixers, bio-reactors as well as the interior of tanks, hoppers, silos, agitators and other, normally closed, vessels and reactors in potentially explosive environments. Gas: Zones 1 and 2, Dust: Zones 21 and 22.
The special advantages of Lumiglas LED technology:
long service life and operational reliability
continuous LED operation up to around 50,000 hours
optimal for fittings that are difficult to access
no heat radiation in the light aperture (cold light)
no unwanted additional heat in chemical and/or biological processes
extremely high-contrast illumination
Compact design, powerful light output:
Glare-free illumination; suitable for circular sight glass fittings to DIN 28120/DIN 28121 or similar, for screw-type sight glass fittings in compliance with DIN 11851 and for sight glass fittings on flow indicators.
Ideal for applications in sterile areas
Protection class: IP 65 and IP 67 acc. to DIN EN 60529
Temperature Class: to T6 Ambient temperature: up to 40°C
Suits circular sight glass fittings to DIN 28120/28121 or similar from size DN 40 and screwed sight glass fittingsDIN 11851 from DN 65
Operating Voltage 24 V, 120 V-230 V Power 11 W
Secured by hinged bracket or adapter flange
modified by an inside mounting flange specially for Aseptik Technology
Visulex Camera Systems – an intrinsically safe remote observation camera system
REMOTE OBSERVATION NEVER SEEN BEFORE
The Visulex Camera System is ideal for inspection and remote observation of process operations, particularly in explosive environments and for monitoring objects that are not normally accessible.
The Visulex Camera System has 2 different types of cameras to suit either explosive environments with cameras that have been certified as explosion proof and non-ex cameras.
The Visulex Cameras are encased in a stainless steel housing, making them ideal for use in sterile room technology.
Visulex Camera Systems for remote observation giving you greater safety and less down time.
Visulex Camera Systems gives continuous availability of visual process data in a central control room saving considerable costs, work and travel time.
Perfect CCTV for on-site inspections of critical production areas or external facilities. The Visulex Camera System meets remote observation requirements with optimum cost effectiveness.
Similar to the internationally renowned Lumiglas luminaires, the camera system can be attached to a sight glass fitting using a hinged bracket. If the standard illumination of the process is not sufficient, an additional Lumiglas luminaire can be attached if fitting allows.
An advanced system that is easy to operate
With Visulex Camera Systems, the visual process data is displayed for control and evaluation purposes and is also available for further image processing, this enables, for instance, the digital storage of the entire process sequence for trace-ability purposes. The Intrinsically Safe Visulex Camera System with Lumiglas Luminaires provides ideal lighting conditions to illuminate the object to be observed.
simple installation and operation
transfer data via cable, wifi, web or 3G/LTE
option to store single images or video sequences
ideally suited for sterile conditions for laboratory bio processing
explosion proof (fully Ex certified)
For further details on the system control device and the data management software, please read the supplied information sheet (PDF).